Showing posts with label Stylecraft special aran. Show all posts
Showing posts with label Stylecraft special aran. Show all posts

Monday, 20 April 2020

CoronaCal borders: EYE MOTIF AND SQUARE



Please read carefully there are options for the border depending on 
how you joined your blanket together and if you added half eye motifs

RIPPLE ENDS PATTERN:

This was given a week or so ago, just to do the ripple ends and then the half 
eye motifs if added would straighten the other two side of the blanket.

Some have used two half eyes and some have use one half eye motif each end.

I actually am not a lover of half motifs and decided to edge my blanket with 
no half motifs so there will be a selection of ways to finish your blanket

ORIGINAL RIPPLE END PATTERN
Having joined 10 'eye' motifs together in a side by side with long half motifs 
at each corner, the blanket now has a deep ripple edge on two sides.

IF YOU HAVEN'T DONE THE RIPPLE ENDS THEN SCROLL DOWN TO DO THE COMPLETE 5 ROUND BORDER PATTERN BELOW

CoronaCal Ripple ENDS Pattern
US terms
Aran 5mm hook DK 4mm Hook

NOTE: For me the 2 row join colours were cream then camel so the colours to make the ripple match the eye motif joins will be the same, camel first and 
then the cream so it matches the joining

ROW 1: Att. camel yarn in the first sp, ch2, counts as first dc, 3dc into same 
sp, 3dc in next 8sps, miss the next dip sp, 3dc in next 8sps, 3dc, ch3, 3dc in point, repeat to end and finish with 4dc in last sp of last half eye motif.

[9granny shells on each up and down of ripple.]

ROW 2: Att. cream, and repeat row 1.

COMPLETE BLANKET EDGING

[Side by side eye motif blanket]

If you added the 2 rows of the ripple border and are now adding the border 
to the straight sides. You will need 2 rows of granny shells adding to the 
straight sides as you have done to the ripple ends.
WORKING ACROSS THE STRAIGHT ENDS WITH THE HALF MOTIFS.

ROW 1: Att. yarn and work granny shells of 4dc in first sp, 
AND ALL SIDE SPS, EXCEPT the 7th row and the 3rd row after the spears, 
ON THE HLAF EYES. Granny shells into each sp of the middle 6 sps, of the full eye motif and then granny shell in same 13 side sps, OF A HALF EYE to end, finish with 4dc in last sp.
NOTE: The number of granny shells for the length of the straight edge of the half motifs is 13 granny shells of 3dc, 
[13 from centre to edge, 25 for the whole length of a half eye]
ROW 2: Att. next col, in sp between the 1st and second dc ch2, counts as first dc 3dc into same sp, granny shell of 3dc in each sp, to end, 4dc in last sp.
ROW 3: Att. yarn in any corner, this row will go all the way around the blanket, remember to do 3dc, ch3, 3dc at corners and points on ripple sides and miss 
the dips, so the blanket lies flat. sl st, to complete.
deep ripple side

if you left off the half eyes there will be a shallow ripple too

ROW 4: Double 'v' st [2dc, 2ch, 2dc]. Att yarn in any corner, 2dc, ch3 2dc, 
in all 4 corner sps, 2dc, ch2, 2dc in every side sp, miss all dips, so the blanket lies flat. repeat and sl st to complete.
ROW 5: Att. yarn in sp, before the corner to point, with a sc, 6sc in the corner ch3 sp, sc in next sp between'v' sts, 5sc in all side ch2 sps, of each 'v'. sl st to complete.
ROW 6: Working into the BACK of the st ONLY, sc in each st missing one st in each dip. that means miss the sc st, between 'v' sts, sl st to complete.
DOING THE BORDER TO A COMPLETE D BLANKET.
ROW 1: Granny shells in every sp, miss dips and do 3dc ch3 3dc in corners 
and points.
ROW 2: repeat row 1
ROW 3: Double 'v' st [2dc, 2ch, 2dc]. Att yarn in any corner, 2dc, ch3 2dc, 
in all 4 corner sps, 2dc, ch2, 2dc in every side sp, miss all dips, so the blanket lies flat. repeat and sl st to complete.
ROW 4:Att. yarn in sp, before the corner to point, with a sc, 6sc in the corner ch3 sp, sc in next sp between'v' sts, 5sc in all side ch2 sps, of each 'v'. sl st to complete.
ROW 5: Working into the BACK of the st ONLY, sc in each st missing one st in each dip. that means miss the sc st, between 'v' sts, sl st to complete.
Join my Facebook group for this pattern and to share you blankets so far.

CORONACAL SQUARE BORDER

After joining your selected number of 12" squares together i've made mine 
of 9 square and it will measure around 4' after blocking.

SQUARE BORDER PATTERN



ROUND 1: Att.yarn, LIGHT COL. i any corner sp, ch2 counts as first dc, 2dc ch3, 3dc, miss 3 sts, 3dc in next st, miss 2 sts 3dc in next st, repeat the 
granny shell in every 3rd st, and 3dc, ch3, 3dc, in each corner, to end
[12 granny shells per square], sl st to complete.

ROUND 2: DARK COL. repeat round 1: Granny shells
ROUND 3: LIGHT COL. repeat round , granny shells.
ROUND 4- 9: DARK COL. dc in every st, 2dc, ch3 2dc in corner sps, sl st to complete.
ROUND 10: Att. LIGHT COL. yarn in any corner, 3dc, ch3, 3dc in corner sp,
miss 3sts, 3dc in next sp, miss 2sts, 3dc in next st repeatmiss 2sts 3dc in 
next st to end, with 3dc, ch3, 3dc in corner sps, sl st to complete.
ROUND 11: Att. DARK COL. Repeat round 10.
ROUND 12: Att. LIGHT COL. Repeat round 10


Friday, 17 April 2020

CORONACAL GRANNY SQUARE PATTERN

Slight change of plan for today's post, after seeing the Square everyone voted for doing the Square today and the borders on Monday 20th April 2020


CORONACAL SQUARE PATTERN




US TERMS
5mm hook for Aran
4mm hook for DK

Inspired by my studio wallpaper, this square 'tile' is another giant just like the eye motif, measuring approx 12" 



So a small blanket can be made from 4, 6 or 9 squares or a larger blanket with 12 or 36 square would be a huge 6'+ square.

I've made mine in several shades of blues, from aqua to dark blue. I am running out of left overs for these colours so cant be exact with shades used its what i can find and all the squares will be slightly different although as close as i can make them.








THE SQUARE PATTERN
is the same up to adding the spears then it changes slightly


Add 4 spears every 3rd section in each corner.

SQUARE PATTERN


Finger wrap of 8 wraps OR ch4 sl st into a circle. Please try to master the finger wrap it makes such a different to the start of your motifs


ROUND 1: 12sc into circle, sl st to complete. [12sc]

ROUND 2: 2dc, into each st, sl st to complete.[24dc]

ROUND 3: 3dc in the sp, between each pair of dc of previous round. [36dc]

ROUND 4: sc in every st, sl st to complete. [36sc]

ROUND 5: Hdc in first 2 sts, 2hdc in next st, repeat, sl st to complete. [48hdc]

ROUND 6: [double 'v' st] att. yarn in 2nd hdc, of round before, 2tr, ch3, 2tr, in same st, miss 3sts, repeat in next second hdc, miss 3 sts, repeat to end, sl st to complete. [12 Double 'v' sts]

ROUND 7: att, yarn in any sp, between the double 'v' st, 3dc, ch3, 3dc [shell st], in next ch3 sp, sc, in next sp between, repeat, sl st to complete. 
[12 shell sts]

ROUND 8 Add 4 spears on every 3rd space.

NOTE: Use the second ch st on each point to join the diamond/spear to the dip and points of the shells of round 7.


MAKING SPEARS 
A finger wrap of 8 wraps
ROUND 1: 12sc, into the circle
ROUND 2: Change col. Starting in any st but you are doing the outer point first, ch6, counts as first tr and ch3 point, 1tr into the same st, 
1dc, into the next 3sts, dc, ch3, dc, into the next st, (side point and where you join using the 2nd ch st, replacing it with a sl st to join the a shell point), 
1dc into the next st, 1dc, ch3 1dc, into the next st (bottom point, join as you go replacing the second ch st, with a sl st tp join to the dip) 
1dc in the next st, 1dc, ch3, 1dc, into next st, (second side point, join as you go replacing the 2nd ch for a sl st to join the the point of a shell st), 
complete with 1dc, in next 3sts, sl st into 3rd ch to complete 

CONT. WITH SQUARE AFTER ATTACHING 4 SPEARS.

ROUND 9: Att yarn in any spear point 5sc in same ch3 sp, sc in next 5sts [side of the first spear], ch3, tr into the first dip, ch3, sc into next point of round 7, ch3, tr into  next dip, ch3, sc into next 5 sts [side of spear] repeat for all 4 sides. sl st to complete. Cont.
[15sc around 4 spears, 4 x ch3 loops at each side]


ROUND 10: Cont. with same colour, ch2 [counts as first dc], dc in next 2sts, 
dc, ch2, dc, in next st, [first corner], dc in next 7sts, you should now be at the ch3, loop spaces, 3dc in next 4 x ch3 sps, dc in next 7sts, dc, ch2, dc, [second corner] dc in next 7 sts, repeat for all sides, and all corners, sl st to complete.[28dc each side]

ROUND 11: Att. yarn in any corner, ch4 counts as first dc and ch2 sp, dc in same sp, dc in next 28sts, dc, ch2 dc in next corner sp, repeat for each side, sl st to complete. [30dc each side]

ROUND 12: Att, yarn in a corner sp, sc, ch2 sc, in same sp, sc in next 30 sts, sc ch2 sc in next corner sp, repeat for each side, sl st to complete, CONT. 
[32sc each side]

ROUND 13: Cont. in same colour, WORKING ONLY IN THE BACK OF THE ST AND THIS WILL BE THE JOIN AS YOU GO ROUND, 
dc in each stitch with ch2 at each corner, sl st to complete.

JOIN AS YOU GO...Using a sl st after each dc to join to the matching st of the first completed square 


                  








Monday, 6 April 2020

CoronaCal Ripple band pattern

Monday 6TH APRIL 2020 



RIPPLE ENDS PATTERN

Having joined 10 'eye' motifs together in a side by side with long half motifs at each corner, the blanket now has a deep ripple edge on two sides.

Before I give you the very basic ripple pattern I just want to say this might be extended when I add the decorative border pieces.
When this small repeat pattern Is finalised I will work out the length needed to add a set number of these. 
And why the ripple band might need to be EXTENDED.

With that in mind for now I have just added to rows of the ripple pattern..they might all be the same they might be other stitches so just 2 rows to match the joining rows for now.

Join my Facebook group for this pattern and to share you blankets so far.

Friday, 3 April 2020

CoronaCal, PART 4: HALF 'EYE' MOTIF



PART 4: HALF EYE MOTIF

US Terms

Finger wrap of 5 wraps.
NOTE: The first anchor st doesn't count, so the first complete st, is made by the anchor and the first sc, you need 8sc to work into for the 2nd round.

SOME Rounds are worked into spaces and some into stitches.

ROW 1: 8sc into the circle.  [8sts]


 ROW 2: att, yarn in first st, ch2,  2dc into next 6sts, 1dc in last st. [14dc]


ROW 3: Att. yarn in fist sp, ch2, dc in same sp, miss 2sts, 3dc in next 5sps,  2dc in last sp. [5x 3dc, 2 x 2dc]



NOTE:  The firsts ts can be a little hidden, so dont miss it!

ROW 4: Att. yarn in first sp, sc in same sp, sc in next 17sts, 2sc in last sp. [21sc]



ROW 5: Att. yarn in fist sts, ch1 [counts as first hdc] 1hdc, in same st, 1hdc, in next st, 2hdc, in next st, 1hdc in next 2sts, 2hdc in next st repeat the 1hdc in next 2stsm 2hdc in next stitch to last 2sts, 1hdc in next st, 2hdc in last st.
[28hdc]


ROW 6: Double 'v' stitch round. Att. yarn in first st, ch3 [counts as first tr], miss 2sts, 2tr, ch3 2tr into next st, miss 3sts, 2tr, ch3, 2tr in next st, repeat to last 3 sts, miss 2sts, 1tr in last st. [2x1tr, 6 x double tr, 'v' sts]


ROW 7: Shell stitch round. Att, yarn in first sp, 3dc, ch3 3dc, in ch3 sp, sc in next sp, repeat to end, sc in last sp. [6 x shells stitch of 3dc ch3 2dc]




RIGHT AND LEFT HALF SPEARSLOOKING AT THE MOTIF FLAT SIDE DOWN
RIGHT SPEAR
Finger wrap of 6 wraps.
ROW1: Att yarn, in first st, ch5, tr into same st, dc into next 4sts, ch1, sl st, into first shell point, ch1, dc into same st, dc into next st, 2dc into last st, sl st into dip. Repeat for opposite end.

LEFT SPEAR
Finger wrap od 6 wraps.

ROW 1: 8sc into circle

ROW 2: Att.yarn in first st, ch2 sl st, into dip, dc into same st, dc into next 2sts, ch1, sl st, into first shell point, ch1, dc into same st, dc into next 3 sts, tr, ch2, tr into last st.





NOTE: Rounds AFTER SPEARS, uses spaces and stitches. 

ROW 1: After adding 2 half spears. Att yarn in first spear point sp, ch1, 4sc, into same point, sc, into next 5sts, ch4, tr into sc, at dip, ch4 sc into next shell point, repeat to last ch4, sc in next 5sts of second spear, 4sc in point of half spear, TURN...
ROW 2: CONT. ch2 counts as first dc, dc in same st, dc in next 8sts, 4dc in next 10 x ch4 loops ONLY, to the spear, dc in next 5sts, dc in next 3sts, 2dc in last st. [60dc] 


NOTE: MAKE SURE YOU GO BACK TO THE RIGHT SIDE OF THE MOTIF FOR ROUND 3

ROW 3: Att yarn in first st, ch2 counts as first dc, dc in same st, dc in next 2sts, 2dc in next st, dc in next 21sts, 2dc in next st, dc in next 8 sts, 2dc in next st, dc in next 21sts, 2dc in next st, dc in next 2sts, 2dc in last sp. [66dc]

ROW 4: 'v' stitch rounds, Att. yarn in first sp, ch4 dc in same sp, miss 2sts, dc, ch3 dc, in next st, repeat to end, dc ch2 dc in last sp. [23'V' sts]

ROW 5: Basically a repeat of round 4 BUT...using tr, ch3 tr, for your 'v's and start with ch5 [counts as tr, ch2 sp], tr, in same sp, and at the end you finish with tr, ch2 tr, in last sp. [23 'v' sts]





JOINING BORDER

ROW 1: Granny shells, att yarn, 4dc, ch1, 3dc, ch1, repeat the 3dc ch1, to end, in the last ch1 sp, 4dc. [23 granny shell]

ROW 2: JOIN AS YOU GO ROUND, Att. yarn in first sp, between the fist and second dc, dc, sl st to make first join into the 16th sp, 3dc sl st into the spaces, until you have joined 9 sps, you should be at the flat section of the join, join the next 6 sps. then cont. to do the 3dc ch1 to the end of the half motif.



MAKE AND JOIN 4 OF THESE HALF MOTIFS EITHER SIDE OF THE THROW. 

Because the other two sides are not actually half motifs 
AND IM TRYING MY BEST TO STAY IN FRONT OF YOU ALL WITH THIS CAL....
I decided to do a ripple band for the other 2 sides.

If you know me well, i dont usually do half motifs i'd much rather keep the decorative edges created but for this pattern i have added one half motif for you all x

RIPPLE SIDES PATTERN
Monday 6TH APRIL 2020